SS White

RA Carbide 1557, 10 Pack

Shank Diameter: 2.35mm, Overall Length: 22.5mmThe combination of a round head and straight fissure avoids the necessity of changing burs for the two operations of enamel penetration and side cutting. Ideally suited to the...

FG SL Carbide 701, 5 Pack

Shank Diameter: 1.60mm, Overall Length: 19.0mm Delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. Our burs are engineered to deliver the...

RA Carbide 4, 10 Pack

SS White RA-4 10/PkSS White - Round for slow speed latch.

RA Carbide 6, 10 Pack

SS White RA-6 10/Pk SS White - Round for slow speed latch.

RA SL Carbide 6, 5 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

RA SL Carbide 8, 5 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

FG Carbide 245, 10 Pack

SS White FG-245 10/Pk SS White - Amalgam Preparation

RA Carbide 3, 10 Pack

SS White RA-3 10/Pk SS White - Round for slow speed latch.

FG SL Carbide 4, 5 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

RA Carbide 2, 10 Pack

SS White RA-2 10/PkSS White - Round for slow speed latch.

20 Blade Finishing Carbide 8379, 5 Pack

Shank: FG Shape: Football Pack Size: Roll 25 Length Overall: 20.0 Working Length: 3.7 Head Diameter: 2.3 Number of Blades: 20 Permanent Crowns: Yes Laminate Veneer: Yes Inlay/Onlay: Yes Temporization: Yes The S.S. White carbide trimming and finishing...

FG Carbide 330, 10 Pack

This shape may be used for much of the preparation of conservative to moderately large occlusal cavities and also for Class III interproximal cavities in anterior teeth. SS White burs will produce rounded internal line angles and occlusally convergent...

FG SL Carbide 1558, 5 Pack

These SS White burs may be used wherever straight parallel sides and flat floors are desired.Some applications are: establishing of initialoutline form, gaining access to carious dentin and preparation of lateral walls.

30 Blade Finishing Carbide 9006, 5 Pack

SS White® round burs are ideal for:• Contouring and finishing restorations• Root planing• Bone contouring and smoothing

RA SL Carbide 2, 5 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

FG SL Carbide 557, 5 Pack

These SS White burs may be used wherever straight parallel sides and flat floors are desired.Some applications are: establishing of initialoutline form, gaining access to carious dentin and preparation of lateral walls.

RA Carbide 34, 10 Pack

Inverted cone burs are used pri- marily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class II cavities. Inverted cone burs are also...

RA SL Carbide 4, 5 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

FG Carbide 1/4, 10 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

Great White Gold Carbide GW245, 10 Pack

Head Diameter: 0.9mm, Working Length: 2.8mm, Overall Length: 19.0mmThis shape may be used for much of the preparation of conservative to moderately large occlusal cavities and also for Class III interproximal cavities in anterior teeth. SS White burs...

12 Blade Finishing Carbide CFT2, 5 Pack

SS White - 12 blade SS (short shank) composite finishing and trimming bur.

RA Carbide 8, 10 Pack

SS White RA-8 10/Pk SS White - Round for slow speed latch.

12 Blade Finishing Carbide 7902Sl, 5 Pack

SS White - 12 blade Needle T&F bur SL

FG Carbide 169, 10 Pack

Whenever taper is required on cavity walls, such as for inlay or onlay preparations for cast gold, ceramic, or composite resin, SS White taper-fissure burs will accurately cut with a fine degree of divergence and facilitate the avoidance of undercuts.

FG Carbide 256, 10 Pack

SS White FG-256 10/Pk SS White - All Purpose

FG SL Carbide 6, 5 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

Great White Gold Carbide GW557 Short Shank, 10 Pack

Head Diameter: 1.0mm, Working Length: 3.8mm, Overall Length: 17.0mm These SS White burs may be used wherever straight parallel sides and flat floors are desired.Some applications are: establishing of initialoutline form, gaining access to carious dentin...

RA Carbide 5, 10 Pack

SS White RA-5 10/Pk SS White - Round for slow speed latch.

RA SL Carbide 558, 5 Pack

These SS White burs may be used wherever straight parallel sides and flat floors are desired.Some applications are: establishing of initialoutline form, gaining access to carious dentin and preparation of lateral walls.

FG Carbide 699 Short Shank, 10 Pack

Delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. Our burs are engineered to deliver the most efficient cutting rate and performance for...

RA SL Carbide 557, 5 Pack

These SS White burs may be used wherever straight parallel sides and flat floors are desired.Some applications are: establishing of initialoutline form, gaining access to carious dentin and preparation of lateral walls.

12 Blade Finishing Carbide 7006, 5 Pack

SS White T&F Burs 12-Bladed FG-7006 5/Pk SS White - 12 blade Round finishing bur

12 Blade Finishing Carbide CFT3, 5 Pack

SS White T&F Burs 12-Bladed FG-CFT3 5/Pk SS White - 12 blade SS (short shank) composite finishing and trimming bur.

FG Carbide 557, 10 Pack

These SS White burs may be used wherever straight parallel sides and flat floors are desired.Some applications are: establishing of initialoutline form, gaining access to carious dentin and preparation of lateral walls.

FG Carbide 702, 10 Pack

SS White FG-702 10/Pk SS White - Taper Fissure Crosscut

FG SL Carbide 1703, 5 Pack

Delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. Our burs are engineered to deliver the most efficient cutting rate and performance for...

Great White Gold Carbide GWsl 557, 5 Pack

Head Diameter: 1.0mm, Working Length: 3.8mm, Overall Length: 26.0mm These SS White burs may be used wherever straight parallel sides and flat floors are desired.Some applications are: establishing of initialoutline form, gaining access to carious dentin...

RA Carbide 1/2, 10 Pack

SS White RA-1/2 10/Pk SS White - Round for slow speed latch

RA Carbide 35, 10 Pack

Inverted cone burs are used pri- marily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class II cavities. Inverted cone burs are also...

RA Carbide 702, 10 Pack

Shank Diameter: , Overall Length:   Delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. Our burs are engineered to deliver the most...

12 Blade Finishing Carbide 7104, 5 Pack

SS White T&F Burs 12-Bladed FG-7104 5/PkPOWERFUL CUTTING PERFORMANCE Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of...

12 Blade Finishing Carbide 7408, 5 Pack

SS White T&F Burs 12-Bladed FG-7408 5/Pk POWERFUL CUTTING PERFORMANCE Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of...

30 Blade Finishing Carbide 9406, 5 Pack

SS White Finishing FG-9406 5/PkThe S.S. White carbide trimming and finishing burs are specifically designed for the shaping and finishing of all dental materials. The unique spiral design allows blades to continually remain in contact with the cutting...

FG Carbide 1557, Bulk 100

The combination of a round head and straight fissure avoids the necessity of changing burs for the two operations of enamel penetration and side cutting. Ideally suited to the preparation of minimal occlusal fissure (Class...

FG Carbide 170, 10 Pack

Whenever taper is required on cavity walls, such as for inlay or onlay preparations for cast gold, ceramic, or composite resin, SS White taper-fissure burs will accurately cut with a fine degree of divergence and facilitate the avoidance of undercuts.

FG Carbide 256, Bulk 100

Shank Diameter: 1.60mm, Overall Length: 19.0mmDelivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. Our burs are engineered to deliver the...

FG Carbide 33 1/2 Short Shank, 10 Pack

Inverted cone burs are used pri- marily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class II cavities. Inverted cone burs are also...

FG Carbide 33.5, 10 Pack

Inverted cone burs are used pri- marily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class II cavities. Inverted cone burs are also...

FG Carbide 330 Short Shank, 10 Pack

This shape may be used for much of the preparation of conservative to moderately large occlusal cavities and also for Class III interproximal cavities in anterior teeth. SS White burs will produce rounded internal line angles and occlusally convergent...

FG Carbide 330 Short Shank, Bulk 100

This shape may be used for much of the preparation of conservative to moderately large occlusal cavities and also for Class III interproximal cavities in anterior teeth. SS White burs will produce rounded internal line angles and occlusally convergent...

FG Carbide 39, Bulk 100

Shank Diameter: 1.60mm, Overall Length: 25.0mmInverted cone burs are used pri- marily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class...

FG Carbide 6 Short Shank, 10 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

FG Carbide 7, 10 Pack

SS White FG-7 10/Pk SS White - Round

FG Carbide 8, 10 Pack

SS White FG-8 10/Pk SS White - Round

Great White Gold Carbide GW1557, 10 Pack

Head Diameter: 1.0mm, Working Length: 3.8mm, Overall Length: 19.0mm These SS White burs may be used wherever straight parallel sides and flat floors are desired.Some applications are: establishing of initialoutline form, gaining access to carious dentin...

RA Carbide 33 1/2, 10 Pack

Inverted cone burs are used pri- marily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class II cavities. Inverted cone burs are also...

RA Carbide 36, 10 Pack

Inverted cone burs are used pri- marily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class II cavities. Inverted cone burs are also...

RA Carbide 39, 10 Pack

Inverted cone burs are used pri- marily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class II cavities. Inverted cone burs are also...

RA Carbide 7, 10 Pack

The smaller SS White round burs are popular for the preparation of conservative single surface cavities.Medium sizes may be used for interproximal cavities in anterior teeth (Class III).Additional applications include gaining root canal access both...

RA Carbide 700, 10 Pack

Shank Diameter: , Overall Length: Delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. Our burs are engineered to deliver the most efficient...