Trimming & Finishing

Carbide Burs. FG-7901 T&F 12-blades Needle. 10 pcs.

NeedleEstablishes anatomical pits and fissures in occlusal surfaces.

Carbide Burs. FG-7406 T&F 12-blades Egg. 10 pcs.

  EggFor contouring or placing anatomy on posterior occlusal surfaces. Also suitable for smoothing and shaping anterior lingual surfaces.

Carbide Burs. FG-7902 T&F 12-blades Needle. 10 pcs.

NeedleEstablishes anatomical pits and fissures in occlusal surfaces.

Carbide Burs. FG-7408 T&F 12-blades Egg. 10 pcs.

EggFor contouring or placing anatomy on posterior occlusal surfaces. Also suitable for smoothing and shaping anterior lingual surfaces.

Carbide Burs. FG-7404 T&F 12-blades Egg. 10 pcs.

EggFor contouring or placing anatomy on posterior occlusal surfaces. Also suitable for smoothing and shaping anterior lingual surfaces.

Carbide Burs. FG-7901 T&F 12-blades Needle, Clinic Pack of 100/bag

Diameter: (Ø 1/10 mm) 009, Length: 3.2mm   NeedleEstablishes anatomical pits and fissures in occlusal surfaces.

Carbide Burs. FG-7406 T&F 12-blades Egg. Clinic Pack of 100/bag

EggFor contouring or placing anatomy on posterior occlusal surfaces. Also suitable for smoothing and shaping anterior lingual surfaces.

Carbide Burs. FG-7006 T&F 12-blades Round. 10 pcs.

RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-7004 T&F 12-blades Round. 10 pcs.

RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-7008 T&F 12-blades Round. 10 pcs.

RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-7106 T&F 12-blades Flame. 10 pcs.

FlameUseful in establishing and defining pit and fissure anatomy.

Carbide Burs. FG-7802 T&F 12-blades Bullet. 10 pcs.

BulletIdeal for initial definition of fissures and anatomy in posterior teeth.

Carbide Burs. FG-7003 T&F 12-blades Round. 10 pcs.

Diameter: (Ø 1/10 mm) 012 RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-7902 T&F 12-blades Needle, Clinic Pack of 100/bag

NeedleEstablishes anatomical pits and fissures in occlusal surfaces.

Carbide Burs. FG-7903 T&F 12-blades Needle. 10 pcs.

Diameter: (Ø 1/10 mm) 012, Length: 3.7mmNeedleEstablishes anatomical pits and fissures in occlusal surfaces.

Carbide Burs. FG-7009 T&F 12-blades Round. 10 pcs.

RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-7214 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 010, Length: 5.1mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7404 T&F 12-blades Egg. Clinic Pack of 100/bag

EggFor contouring or placing anatomy on posterior occlusal surfaces. Also suitable for smoothing and shaping anterior lingual surfaces.

Carbide Burs. FG-9006 T&F 30-blades Round. 10 pcs.

Diameter: (Ø 1/10 mm) 018RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-9642 T&F 30-blades Extra Long Taper Finishing. 10 pcs., Extra Long Taper

Diameter: (Ø 1/10 mm) 010, Length: 5.7mm Taper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-9714 T&F 30-blades Taper Finishing. 10 pcs.

FG-9714 5 Pcs 30 Blade Tapered Trimming and Finishing Bur

SS White T&F Burs, Composite 12-Bladed FG C.F.T. 3 5/Pk

  SS White T&F Burs 12-Bladed FG-CFT3 5/Pk SS White - 12 blade SS (short shank) composite finishing and trimming bur.

Carbide Burs. FG-7104 T&F 12-blades Flame. 10 pcs.

FlameUseful in establishing and defining pit and fissure anatomy.

Carbide Burs. FG-7114 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 009, Length: 2.9mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7204 T&F 12-blades Taper Finishing. 10 pcs.

Taper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any contouring challenge.

Carbide Burs. FG-7612 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 014, Length: 5.8mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-9406 T&F 30-blades Egg. 10 pcs.

Diameter: (Ø 1/10 mm) 018, Length: 3.4mmEggFor contouring or placing anatomy on posterior occlusal surfaces. Also suitable for smoothing and shaping anterior lingual surfaces.

Carbide Burs. FG-9904 T&F 30-blades Needle. 10 pcs.

NeedleEstablishes anatomical pits and fissures in occlusal surfaces.

SS White T&F Burs, Composite 12-Bladed FG C.F.T. 2 5/Pk

SS White - 12 blade SS (short shank) composite finishing and trimming bur.

SS White T&F Burs, Egg 12-Bladed FG-7408 5/Pk

SS White T&F Burs 12-Bladed FG-7408 5/Pk POWERFUL CUTTING PERFORMANCE Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of...

SS White T&F Burs, Flame 12-Bladed FG-7104 5/Pk

SS White T&F Burs 12-Bladed FG-7104 5/PkPOWERFUL CUTTING PERFORMANCE Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of...

T&F Hybrid Diamond Points 935 Super Fine 1/Pack

Length: 4; ISO 499/012; Recommended Speed: Less than 450,000 RPMTrimming & Finishing Hybrid Diamond Points are designed with ultra-fine grit for fine adjusting and preparation for polishing in aesthetic dentistry. Computerized manufacturing for the...

T&F Hybrid Diamond Points 937 Super Fine 1/Pack

Length: 3.7; ISO 243/009; Recommended Speed: Less than 450,000 RPMTrimming & Finishing Hybrid Diamond Points are designed with ultra-fine grit for fine adjusting and preparation for polishing in aesthetic dentistry. Computerized manufacturing for the...

T&F Hybrid Diamond Points 943 Super Fine 1/Pack

Length: 8; ISO 165/011; Recommended Speed: Less than 300,000 RPM Trimming & Finishing Hybrid Diamond Points are designed with ultra-fine grit for fine adjusting and preparation for polishing in aesthetic dentistry. Computerized manufacturing for...

Carbide Burs. FG-7002 T&F 12-blades Round. 10 pcs.

Diameter: (Ø 1/10 mm) 010RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-7103 12 blades, Concave Interproximal T&F, 10 pcs.

Diameter: (Ø 1/10 mm) 012, Length: 3.2mmConcave InterproximalIdeal for removing excess composite from proximal margins and embrasures.

Carbide Burs. FG-7108 T&F 12-blades Flame. 10 pcs.

FlameUseful in establishing and defining pit and fissure anatomy.

Carbide Burs. FG-7205 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 016, Length: 8.5mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7206 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 018, Length: 8.5mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7283 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 016, Length: 9.9mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7303 12 blades, Inverted Taper T&F, 10 pcs.

Diameter: (Ø 1/10 mm) 012, Length: 4.1mmInverted TaperUseful for obtaining a smooth surface on any prepara- tion with converging preparation walls.

Carbide Burs. FG-7304 12 blades, Inverted Taper T&F, 10 pcs.

Diameter: (Ø 1/10 mm) 0 14, Length: 4.1mmInverted TaperUseful for obtaining a smooth surface on any prepara- tion with converging preparation walls.

Carbide Burs. FG-7345 12 blades, Crown & Bridge Chamfer T&F, 10 pcs.

Diameter: (Ø 1/10 mm) 015, Length: 4.2mmCrown & Bridge ChamferIdeal for removing excess composite from proxi- mal margins and embrasures.

Carbide Burs. FG-7408 T&F 12-blades Egg. Clinic Pack of 100/bag

EggFor contouring or placing anatomy on posterior occlusal surfaces. Also suitable for smoothing and shaping anterior lingual surfaces.

Carbide Burs. FG-7572 12 blades, Straight Finishing T&F, 10 pcs.

Diameter: (Ø 1/10 mm) 010, Length: 4.9mmStraight FinishingIdeal for any instance when a straight, smooth preparation margin is desired or when convenience demands a straight-bladed shape.

Carbide Burs. FG-7611 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 010, Length: 3.9mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7613 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 014, Length: 8.7mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7642 T&F 12-blades Extra Long Taper Finishing. 10 pcs., Extra Long Taper

Diameter: (Ø 1/10 mm) 010, Length: 5.7mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7664 T&F 12-blades Extra Long Taper Finishing. 100 pcs., Extra Long Taper

Diameter: (Ø 1/10 mm) 015, Length: 8.6mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7702 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 010, Length: 4.9mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7713 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 012, Length: 4.9mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7714 T&F 12-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 014, Length: 7.6mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-7801 T&F 12-blades Bullet. 10 pcs.

BulletIdeal for initial definition of fissures and anatomy in posterior teeth.

Carbide Burs. FG-7801 T&F 12-blades Bullet. 100 pcs.

Diameter: (Ø 1/10 mm) 009, Length: 2.7mmBulletIdeal for initial definition of fissures and anatomy in posterior teeth.

Carbide Burs. FG-7803 T&F 12-blades Bullet. 10 pcs.

BulletIdeal for initial definition of fissures and anatomy in posterior teeth.

Carbide Burs. FG-9004 T&F 30-blades Round. 10 pcs.

Diameter: (Ø 1/10 mm) 014RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-9008 T&F 30-blades Round. 10 pcs.

Diameter: (Ø 1/10 mm) 023RoundIdeal for finishing anterior lingual and posterior occlusal surfaces.

Carbide Burs. FG-9103 24 blades, Concave Interproximal T&F, 10 pcs.

Diameter: (Ø 1/10 mm) 012, Length: 3.2mmConcave InterproximalIdeal for removing excess composite from proximal margins and embrasures.

Carbide Burs. FG-9214 T&F 30-blades Taper Finishing. 10 pcs.

Diameter: (Ø 1/10 mm) 010, Length: 5.1mmTaper FinishingIdeal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in Needle point, Round End and Flat End shapes in multiple lengths to match any...

Carbide Burs. FG-9561 30 blades, Straight Finishing T&F, 10 pcs.

Diameter: (Ø 1/10 mm) 009, Length: 3.2mmStraight FinishingIdeal for any instance when a straight, smooth preparation margin is desired or when convenience demands a straight-bladed shape.