HiTeck

2 Glick, 1.5MM Endodontic Excavator

HiTeck’s endodontic excavators feature extended-length shanks and are meticulously handcrafted from the highest grade stainless steel. They help the clinician access the pulp chamber for easy and...

Rubber Dam Clamp Organizing Board, 8 Pieces (117 mm x 61 mm x 10 mm)

Store, sterilize and organize with eight pegs that securely hold your clamps.

6" Stainless Steel Ruler

6" Stainless Steel Ruler for use during endodontic treatments. With markings in millimeters and inches.

Peet, 12CM, Curved 45 Degree Spreader

HiTeck’s Endodontic Forceps are designed for optimal balance, leverage, and control.

Steiglitz, 12CM, Curved 90 Degree Spreader

HiTeck’s Endodontic Forceps are designed for optimal balance, leverage, and control.

Steiglitz, 14CM, Curved 45 Degree Spreader

HiTeck’s Endodontic Forceps are designed for optimal balance, leverage, and control.

Steiglitz, 14CM, Straight Post & Silver Point Removal Forcep

HiTeck’s Endodontic Forceps are designed for optimal balance, leverage, and control.

Jarabak Pliers

Versatile light wire bending pliers. Grooves assist with precise bending and closing of loops. Serrated surface grips wires. < = .020" (.51 mm)

Lingual Hammerhead NiTi Pliers wit Serrations

Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. These less intrusive pliers are designed for ultimate patient...

Lingual Hammerhead NiTi Pliers

Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. These less intrusive pliers are designed for ultimate patient...

Slim Hammerhead NiTi Pliers

For NiTi wire only, no heat. < = .025” (.64 mm)

Step Pliers, 1MM

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm)

Torquing Pliers with .018"/.022" Key

Torquing Pliers for stainless steel wires, with .018"/.022" Key.

Torquing Pliers with .016"/.018" Key

Torquing Pliers for stainless steel wires, with .016"/.018" Key.

Bird Beak Pliers with Cutter

Smooth bending surfaces for a range of loop sizes while providing a sharp blade for cutting. < = .022" x .025" (.56 mm x .64 mm)

Adams Pliers

Excellent precise right angle bends and appliance application. < = .040" (1.01 mm)

Nance Loop Forming Pliers

For precise forming of loops in four lengths: 3, 4, 5 and 6 mm. Groove at base aids in closing loops. < = .022" (.53 mm)

Light Wire Bird Beak Pliers

A longer cone than a standard bird beak is useful for forming precise loops in light wire. < = .020" (.51 mm)

Hollow Chop Pliers

Perfect for subtle contouring of arch wires. With reduced radius as compared to Hollow Chop Contouring Pliers. < = .030" (.76 mm)

Marcotte Looping Pliers

For precise forming of helical loops and T loops. No right angles. Prevents stress fracture of wires. < = .022" x .025" (.56 mm x .64 mm)