Instruments

10 Molars; General, Rubber Dam Clamp

Flat jaws designed for small upper left and lower right molars; paired with RDCM11

10, 0.75MM, 22 MM Posterior Plugger

Posterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

10.5, 0.90MM, 22 MM Posterior Plugger

Posterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

10.5A, .90MM, 29 MM Anterior Plugger

HiTeck’s Anterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

10/11 Loma Linda Curette

Blade designed with two cutting edges and a rounded toe for use on all surfaces.

10/11 Orban Buccal Lingual File Scaler

Used to crush and remove heavy calculus deposits. Use a pull stroke.

101 Hull Upper & Lower Premolars, Universal Extraction Forceps

Upper and Lower Premolars, and Deciduous; Universal Forceps used for extracting teeth from the alveolar bone.

104 Carver

Used to carve anatomical features and trim excess materials.

104/105 Cattoni Hoe/Chisel

107/108S Modified Cattoni Scaler Curette

Cattoni Scaler/Curette Set for the removal of supragingival calculus

10A, .75MM, 29 MM Anterior Plugger

HiTeck’s Anterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

10S Upper Molars Extraction Forcep

Upper Molars Forceps used to extract teeth from alveolar bone.

11 Anterior Composite Instrument, Siyah Series

With our Aluminum Titanium Nitride (AlTiN) coating, your instruments will resist scratching and sticking. Our large, lightweight satin steel handles are easy to clean-up while providing maximum comfort and control.

11 Bernard Elevator, Straight

he 11 Bernard elevator is also referred to as a syndesmotome and can be used as a periotome or to elevate small roots concave surface with a concave surface that is approximately 3.6mm wide. The straight design is best suited for anterior teeth.

11 CPN Placer

Designed with both small and large placing ends in order to increase efficiency when applying various amounts of base material (such as resin modified glass ionomer).

11 Goldman Fox Periodontal Knife

Goldman-Fox 11, Spear point Periodontal Knife, similar to Goldman-Fox 8, except blades are offset for use in posterior region.

11 Kramer Nevins Periodontal Knife

Thin, sharp, bayonet-shaped knife designed to make secondary interproximal and circumferential incisions during gingivectomy procedures.

11 Miller Spoon Shape Surgical Curette, 3.6MM

The 11 Miller surgical curette is designed for curettage, cyst removal and tooth socket debridement with 3.6MM working ends.

11 Molars; General, Rubber Dam Clamp

Flat jaws designed for small upper right and lower left molars; paired with RDCM10

11 Siyah Bernard Syndesmotome Elevator, Straight

11 Siyah Goldman Fox Periodontal Knife

11 Stout Elevator, 3rd Molars

They are used to loosen the tooth from the periodontal ligament and ease extraction, 5.5mm wide tip.

11, 1.05MM, 22 MM Posterior Plugger

Posterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

11.5, 1.15 MM, 22 MM Posterior Plugger

Posterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

11.5A, 1.15MM, 29 MM Anterior Plugger

HiTeck’s Anterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

11/12 Back Action, 1.5MM/2.0MM Plugger/Condensor

Our array of Pluggers are used to pack filling materials into cavity preparations.

11/12 Binangle Chisel [15-8-8]

Our Chisels are used to refine the cavity preparation, forming line angles on anterior preparations.

11/12 Buck Straight File Periodontal File

Used interproximally. File surfaces on both sides allow for push or pull application.

11/12 Micro Mini Gracey Curette

HiTeck's Micro mini gracey curettes feature a longer terminal shank desugned to access deep periodontal pockets. Compared to the standard Gracey Curette, blade is 50% shorter for better adaptation in narrow pockets and furcations. Blade is 20% thinner...

11/12 Mini Gracey Curette

Terminal shank is 3 mm longer than Standard Gracey. Compared to the standard Gracey curette, blade is 50% shorter and 10% thinner. Good for scaling in deep, narrow pockets.

11/12 Rigid Gracey Curette

Rigid Gracey Curettes have a thicker shank than the standard gracey, which helps remove heavy calculus.

11/14 Gracey Mesial Distal Curette

These combinations of working ends are designed to complete an entire facial or lingual sextant without changing instruments, increasing efficiency.

11/14 Mesial/Distal Mini Gracey Curette

Terminal shank is 3 mm longer than Standard Gracey. Compared to the standard Gracey curette, blade is 50% shorter and 10% thinner. Good for scaling in deep, narrow pockets.

113 Serrated Gingival Cord Packer

For atraumatic and accurate cord placement.

11A Stout Elevator, 3rd Molars

They are used to loosen the tooth from the periodontal ligament and ease extraction, 4.3mm wide tip. The 11A Stout is used for 3rd molars and features a concave working end.

11A, 1.05MM, 29 MM Anterior Plugger

HiTeck’s Anterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

11LX Elevator, Winter Cross-Bar Handle

They are used to loosen the tooth from the periodontal ligament and ease extraction. The 11LX Elevator is used to remove tooth segments or third molars.

11M MacMillan Gouge Elevator

They are used to loosen the tooth from the periodontal ligament and ease extraction, 2.9mm wide tip.

11RX Elevator, Winter Cross-Bar Handle

They are used to loosen the tooth from the periodontal ligament and ease extraction. The 11LX Elevator is used to remove tooth segments or third molars.

11S/12S Sugarman Periodontal Surgical Curette

Larger and heavier curettes for the removal of granulation tissue and tenacious subgingival deposits.

12 CPN Cement Remover

Combines a sickle shaped scaler with a flat blade for removal of excess resin, cement or porcelain flash. The narrow chisel removes excess interproximal material with a push stroke.

12 Howard Bone File

The 12 Howard straight-cut bone file is used for final smoothing and shaping of bone with 8.1mm wide working ends.

12 Miller Spoon Shape Surgical Curette, 4.2MM

The 12 Miller surgical curette is designed for curettage, cyst removal and tooth socket debridement with 4.2MM working ends.

12, 1.30MM, 22 MM Posterior Plugger

Posterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

12/13 Gracey Mesial Distal Curette

These combinations of working ends are designed to complete an entire facial or lingual sextant without changing instruments, increasing efficiency.

12/13 Mesial/Distal Mini Gracey Curette

Terminal shank is 3 mm longer than Standard Gracey. Compared to the standard Gracey curette, blade is 50% shorter and 10% thinner. Good for scaling in deep, narrow pockets.

125/126 English Pattern, 2.5MM Excavator

Our Excavators are used for removal of carious dentin.

127/128 English Pattern, 2.0MM Excavator

Our Excavators are used for removal of carious dentin.

128 Nebraska Sickle Scaler, Double Ended

Anterior sickle scaler designed for the removal of supragingival calculus.

129 Posterior Scaler

Posterior sickle scaler designed for the removal of supragingival calculus.

129/130 English Pattern, 1.7MM Excavator

Our Excavators are used for removal of carious dentin.

12A Miller Bone File

Cross-Cut files increase efficiency by cutting in two directions.

12A, 1.30MM, 29 MM Anterior Plugger

HiTeck’s Anterior Root Canal Plugger used to compact filling material during vertical condensation. Marked at 5 mm intervals to assess penetration depth.

12LX Elevator, Winter Cross-Bar Handle

They are used to loosen the tooth from the periodontal ligament and ease extraction, with 15mm wide tip at 75 degree angle. The 12LX Elevator is used to remove tooth segments or third molars.

12M MacMillan Gouge Elevator

They are used to loosen the tooth from the periodontal ligament and ease extraction, 3.4mm wide tip.

12RX Elevator, Winter Cross-Bar Handle

They are used to loosen the tooth from the periodontal ligament and ease extraction, with 15mm wide tip at 75 degree angle. The 12RX Elevator is used to remove tooth segments or third molars.

13 Chandler Bi-Bevel Bone Chisel

13 Lower Premolars Atraumair Extraction Forceps

Atraumair 13 Forceps are used to extract lower premolars.

13 Serrated Lower Premolars Extraction Forceps

Lower Incisors, Canines, Premolars, and Roots Forceps are used for extracting teeth from the alveolar bone.

13/14 Columbia Universal Curette

Columbia Curette blade designed with two cutting edges and a rounded toe for use on all surfaces.