Ultrasonic Cleaner Dentsonic UC 600

Warning: there should be NO metal-metal contact inside the tank during ultrasonic cycle. This includes NO direct loose instrument-to-instrument, cassette-to-tank, cassette-to-cassette, cassette-to-basket metal contact. Make sure cassettes have standard silicone insulations and feet if no basket is used. Tank dimensions are measured without baskets. Basket sizes vary depending on unit.

Use tap water. Special solutions are not necessary in most cases.
Principles of ultrasonic cleaning:
Millions of tiny air bubbles are generated within the liquid by high-frequency vibration.
The air bubbles burst when in contact with objects and dislodge the debris to achieve the cleaning effect.

• Using tap water is sufficient. Purified water or distilled water has the same effect as regular tap water for ultrasonic cleaning.
• When cleaning silver or copper items where oxidation has darkened the items, special solutions needs to be added to the water to remove the oxidation.

Main Features

• Tank opening 32.5 x 20.5 x 9.9 cm / 12.8” x 8.1” x 3.9”. Longest item that can fit inside the tank is 34.0 cm / 13.4”. 6.0 L / 1.6 gallon tank capacity.
• Suspendable basker to drain water conveniently.
• 2 industrial grade ultrasonic transducers (approximately 2 x 55 W = 110 W), 2 ceramic
• heaters (approximately 2 x 80 W = 160 W).
• 3-color LED display. 1 to 30-minute full range timer. 5 temperature settings. Actual temperature thermometer. Solution usage timer. Working status indicators. Degas feature. Independent control circuits and multiple circuit protections.
• Industrial grade IC. Moisture-proofed PCB. Cooling fan. Drainage valve.