HiTeck

Multi Use Pin & Ligature Cutter

Designed to cut soft wire pins and ligature wires. < = .015" (.38 mm)

Flush Cut Distal End Cutter, No Hold

An exceptional universal cutter for all types of wires. < = .021" x .025" (.53 mm x .64 mm)

Universal Cut & Hold Distal End Cutter, Long Handle

When used intraorally it safely holds the cut portion to be discarded. Patient comfort is enhanced by the smooth, tapered tip, with long handle. < = .012" to .021" x .025" (.30 mm – .53 mm x .64...

Micro-Mini Pin & Ligature Cutter

Ultra slim profile is a plus in the most difficult to access areas. Designed to cut soft wire pins and ligature wires. < = .012" (.30 mm)

Hard Wire Cutter, 15 Degrees

15° offset tip enhances access in difficult areas. Designed to cut hard wires. < = .022" x .028" (.56 mm x .71 mm)

Universal Cut & Hold Distal End Cutter

When used intraorally it safely holds the cut portion to be discarded. Patient comfort is enhanced by the smooth, tapered tip. Wire size: < = .012" to .021" x .025" (.30 mm – .53 mm x .64 mm)

The Eraser

The Eraser is designed to reverse or remove unwanted indents placed by other instruments in the Clear Collection.

The Clockwise Wedge

The Clockwise Wedge is used to produce a wedge-shaped indent in an aligner at the facial and at the opposite line angle lingual for a specific tooth to create a rotational couple. Used to create a...

The Counter Clockwise Wedge

The Counter Clockwise Wedge is used to produce a wedge-shaped indent in an aligner at the facial and at the opposite line angle lingual for a specific tooth to create a rotational couple. Used to...

The Petite Punch

The Petite Punch cuts a 4.5mm half-moon cutout for relief of clear aligners around bonded buttons used for elastics and nips away plastic to provide soft tissue clearance to prevent aligner...

The Spot

The Spot creates a tiny rounded dimple for spot contacts to accent small individual tooth movements or added retention.

The Hole Punch

The Hole Punch is used to create half-moon cutouts for relief of clear aligners around bonded buttons used for elastics. No need to attempt to attach buttons to plastic trays. In addition, the Hole...

The Horizontal

The Horizontal instrument produces an indentation to accent individual root torque. It also serves a second purpose by enhancing retention of either clear aligners or retainers by placing an indent...

The Vertical

The Vertical emphasises over-correction of rotations by producing an indentation at the mesial or distal line angles on the facial and/ or lingual of a specific tooth. A rotational couple can also be...

34/35 Angle Former [7-80-2.5-9]

Used for defining angles, obtaining retentive form in dentin and placing bevels on enamel margins.

32/33 Angle Former [9-80-4-8]

Used for defining angles, obtaining retentive form in dentin and placing bevels on enamel margins.

30/31 Angle Former [12-80-5-8]

Used for defining angles, obtaining retentive form in dentin and placing bevels on enamel margins.

E Tungsten Carbide Knife

Tungsten Carbide tips cut easily through all composite materials, cured or uncured, without streaking or discoloration. Used for trimming excess filling material, flash, and overhangs.

Discoid Cleoid Tungsten Carbide Carver

Tungsten Carbide tips cut easily through all composite materials, cured or uncured, without streaking or discoloration. Standard discoid cleoid configuration for shaping occlusal surfaces, contouring...

Anatomical Tungsten Carbide Carver

Tungsten Carbide tips cut easily through all composite materials, cured or uncured, without streaking or discoloration. This instrument adapts to natural tooth curvature and left and right-side...